Double Rail Deep Ladder Brackets

470615: WorkSafe™ Double Rail Deep Bracket

Use Double Rail Deep Bracket when both rails of a stacked extension ladder can be secured. Use Double Rail Bracket when ladder rungs can be obstructed, or when worker does not have to step above bracket mounting location.

Attention: All WorkSafe Ladder and Gutter Brackets must be attached to the fascia or solid 2×4 or 2×6 framing, using four #12 -2 1/2“ screws (included).

Attach WorkSafe™ Brackets using four (4) #12 – 2 ^1/2″hex head steel screws, filling all holes that have been provided.

Note: Whenever possible, make sure both rails of the extension ladder are secured with brackets for maximum safety!

Set of 4 screws included with each bracket.

Additional Paks of Screws Available (see below)
(For use with the Ladder Bracket Screws)

470665: WorkSafe™ Double Rail Deep Gutter Bracket

For use when both rails of a stacked extension ladder can be secured. Installs through the back of a gutter.

Attention: All WorkSafe Ladder and Gutter Brackets must be attached to the fascia or solid 2×4 or 2×6 framing, using four #12 -2 1/2“ screws (included).

Attach WorkSafe™ Gutter Brackets using four (4) #12 – 2 ^1/2″ hex head steel screws, (Minimum of two (2) screws per side).

Note: Whenever possible, make sure both rails of the extension ladder are secured with brackets for maximum safety!

Set of 4 screws included with each bracket.

Additional Paks of Screws Available (see below)
(For use with the Ladder Bracket Screws)