Double Rail Shallow Ladder Bracket

470605: WorkSafe™ Double Rail Shallow Bracket

Use Double Rail Shallow or Deep Brackets when both rails of the extension ladder can be secured. Use Double Rail Brackets when ladder rungs can be obstructed, or when worker does not have to step above bracket mounting location.

Attention: All WorkSafe Ladder and Gutter Brackets must be attached to the fascia or solid 2×4 or 2×6 framing, using four #12 -2 1/2“ screws (included).

Attach WorkSafe™ Brackets using four (4) #12 – 2 ^1/2″ hex head steel screws, filling all holes that have been provided.

Note: Whenever possible, make sure both rails of the extension ladder are secured with brackets for maximum safety!

Set of 4 screws included with each bracket.

Additional Paks of Screws Available (see below)
(For use with the Ladder Bracket Screws)

470655: WorkSafe™ Double Rail Shallow Gutter Bracket

For use when both rails of a ladder can be secured. Installs through the back of a gutter.

Attention: All WorkSafe Ladder and Gutter Brackets must be attached to the fascia or solid 2×4 or 2×6 framing, using four #12 -2 1/2“ screws (included).

Attach WorkSafe™ Gutter Brackets using four (4) #12 – 2 ^1/2″hex head steel screws, (Minimum of two (2) screws per side).

Note: Whenever possible, make sure both rails of the extension ladder are secured with brackets for maximum safety!

Set of 4 screws included with each bracket.

Additional Paks of Screws Available (see below)
(For use with the Ladder Bracket Screws)