WorkSafe Products
Fall Protection Safety Equipment and Accessories
The WorkSafe™ Ladder Bracket Safety System & Accessories Promote a Safe Work Environment for Anyone Using Ladders or Ladder Jack Scaffold Systems.
WorkSafe™ Ladder Brackets are designed to secure your ladders. They help protect the worker and eliminate damage to property. They are used to prevent ladders from falling or kicking out, by securing the ladder to the fascia or other structural surface of a building. Brackets are constructed of a powdered-coated steel for long life, durability and strength. Ladder Brackets come in 4 styles.
WorkSafeTM Gutter Brackets are designed to secure your ladders in situations where rain gutters were previously installed prohibiting use of standard WorkSafe Ladder Brackets. Gutter Brackets are available in 4 styles.
470600: WorkSafe™ Single Rail Shallow Bracket
This style of Bracket will not obstruct ladder rungs. Use Single Rail Shallow or Deep Brackets when only one side of the extension ladder can be secured, or when ladder rungs cannot be obstructed from workers access (i.e. when worker needs to climb past ladder brackets to access other surfaces).
470650: WorkSafe™ Single Rail Shallow Gutter Bracket
For use when ladder rung of an extension ladder cannot be obstructed. Installs through the back of a gutter.
470605: WorkSafe™ Double Rail Shallow Bracket
Use Double Rail Shallow or Deep Brackets when both rails of the extension ladder can be secured. Use Double Rail Brackets when ladder rungs can be obstructed, or when worker does not have to step above bracket mounting location.
470655: WorkSafe™ Double Rail Shallow Gutter Bracket
For use when both rails of a ladder can be secured. Installs through the back of a gutter.
470610: WorkSafe™ Single Rail Deep Bracket
Single Rail Deep Brackets also will not obstruct ladder rungs. Use Single Rail Deep Brackets when only one side of the stacked extension ladder can be secured, or when ladder rungs cannot be obstructed from workers access (i.e. when worker needs to climb past ladder brackets to access other surfaces).
470660: WorkSafe™ Single Rail Deep Gutter Bracket
For use when ladder rung of a stacked extension ladder cannot be obstructed. Installs through the back of a gutter.
470615: WorkSafe™ Double Rail Deep Bracket
Use Double Rail Deep Bracket when both rails of a stacked extension ladder can be secured. Use Double Rail Bracket when ladder rungs can be obstructed, or when worker does not have to step above bracket mounting location.
470665: WorkSafe™ Double Rail Deep Gutter Bracket
For use when both rails of a stacked extension ladder can be secured. Installs through the back of a gutter.
470620: WorkSafe™ Guardrail Brackets
Patent No.: US 7,909,138 B2
WorkSafe™ Guardrail Brackets attach to ladder rungs and can accept one or two Aluminum Guardrails (part #470640 & #470645-sold separately). They are raised or lowered easily and quickly for fast adjustments.
470630: WorkSafe™ Telescoping End Stops
WorkSafe™ Telescoping End Stops attach to the WorkSafe™ 17ft. and 21ft. Aluminum Guardrails (part #470640 & #470645- sold separately). These end stops act as a warning to let workers know they are coming to the end of the work plank.
470635: WorkSafe™ Ladder Rung Hook
WorkSafe™ Ladder Rung Hook slides sideways through hollow ladder rung, then turn to lock in place. The hook will not come out until it is turned sideways to remove.
470645: WorkSafe™ Guardrail
WorkSafe™ 21ft. Aluminum Guardrail weighs only 34 lbs . This guardrail works with walk planks 20ft. in length or smaller.
470640: WorkSafe™ Guardrail
WorkSafe™ 17ft. Aluminum Guardrail weighs only 27.5 lbs . This guardrail works with walk planks 16ft. in length or smaller.
470625: WorkSafe™ Guardrail Carriage
The WorkSafe™ carriage is designed to eliminate the need to place an anchorage point on roofs, when used in conjunction with Work safe Guardrail System. With the ring on the bottom, slide Carriage onto Guardrail prior to inserting Guardrail into Guardrail Brackets.
FULL PRODUCT DETAILS
WorkSafe™ Ladder Bracket Screws 4/PK
Set of 4 screws included with each bracket.Additional Paks of Screws Available.
WorkSafe™ Magnetic Hex Head Driver
For use with the Ladder Bracket Screws
WorkSafe™ End Stop Extension Pin
WorkSafe™ End Stop Lock Pin
WorkSafe™ End Stop Rubber End Cap
Attention: Always Use OSHA Compliant Safety Harness in Conjunction with the WorkSafe™ Ladder Bracket Safety System.
Note: These products must be used in compliance with local, state and federal OSHA regulations. Inspect all components of guardrail system before each use. If ladder or railing brackets, or the aluminum railing are bent, damaged or cracked, discontinue use immediately. Only use WorkSafe™ replacement parts.
Use single rail ladder brackets (part #470600, #470610, #4706650, #470660) when worker must climb higher than bracket mounting height. This style of bracket will not obstruct the ladder rungs
Use double rail ladder brackets (part # 470605, #470615, #470655, #470665) when worker does not have to climb higher than bracket mounting height.
Do not use 2 by 4’s or other material for guardrails . Only use WorkSafe™ Aluminum Guardrails and End Stops with securing pins on each side of Guardrail. If End Stops can not be used (under certain circumstances) still use the securing pins through Guardrail holes. This will prevent the guardrail from sliding back and forth in the guardrail bracket.
Patents secured or pending on all WorkSafe™ products.
MADE IN THE USA