Single Rail Deep Ladder Brackets

470610: WorkSafe™ Single Rail Deep Bracket

Single Rail Deep Brackets also will not obstruct ladder rungs. Use Single Rail Deep Brackets when only one side of the stacked extension ladder can be secured, or when ladder rungs cannot be obstructed from workers access (i.e. when worker needs to climb past ladder brackets to access other surfaces).

Attention: All WorkSafe Ladder and Gutter Brackets must be attached to the fascia or solid 2×4 or 2×6 framing, using four #12 -2 1/2“ screws (included).

Attach WorkSafe™ Brackets using four (4) #12 – 2 ^1/2″ hex head steel screws, filling all holes that have been provided.

Note: Whenever possible, make sure both rails of the extension ladder are secured with brackets for maximum safety!

Set of 4 screws included with each bracket.

Additional Paks of Screws Available (see below)
(For use with the Ladder Bracket Screws)

470660: WorkSafe™ Single Rail Deep Gutter Bracket

For use when ladder rung of a stacked extension ladder cannot be obstructed. Installs through the back of a gutter.

Attention: All WorkSafe Ladder and Gutter Brackets must be attached to the fascia or solid 2×4 or 2×6 framing, using four #12 -2 1/2“ screws (included).

Attach WorkSafe™ Gutter Brackets using four (4) #12 – 2 ^1/2″ hex head steel screws, (Minimum of two (2) screws per side).

Note: Whenever possible, make sure both rails of the extension ladder are secured with brackets for maximum safety!

Set of 4 screws included with each bracket.

Additional Paks of Screws Available (see below)
(For use with the Ladder Bracket Screws)